DIY Kayak Rack Ideas & Plans of 2023

diy kayak rack

Last updated on February 10, 2023

As an Amazon Associate we earn from qualifying purchases.

There are a lot of different DIY kayak rack designs and plans out there, so it can be hard to know where to start when you're looking for the perfect one for your needs. However, with a little bit of research and some creativity, you can easily find or even DIY the perfect kayak rack for your home, garage, or car. For example, many people opt for simple wall-mounted racks that can be installed in just a few minutes and provide an easy way to store and display kayaks.

Others prefer more complex designs that may include features such as wheels or pulleys to make loading and unloading kayaks easier. No matter what your preference is, there's sure to be a kayak rack design that's perfect for you.

If you enjoy kayaking, then you know how important it is to have a good rack to store your kayak on. There are many different types of kayak racks available on the market, but if you're looking for a DIY solution, then here are some great ideas for you. One option is to build a simple frame out of PVC pipe. This is a very inexpensive option and it will allow you to store your kayak safely off the ground.

Another option is to build a wooden rack. This will be more expensive than the PVC option, but it will also be much more sturdy and durable.

Whichever option you choose, make sure that you follow the plans carefully and that you use high-quality materials. Your kayak deserves only the best!

How Do I Make a Simple Kayak Rack?

One of the great things about kayaks is that they are relatively easy and inexpensive to store. You can find a variety of different kayak racks on the market, but it is also possible to make your own. This can be a great option if you are on a budget or if you want to customize the rack to better fit your needs.

Here are some instructions for how to make a simple kayak rack:

1. Decide where you will be mounting the rack. It is important to consider both ease of access and stability when choosing a location.

A garage or shed ceiling is often a good option, as long as there is enough clearance for the kayaks. You could also mount the rack on an exterior wall, although this will require more work to secure it properly.

2. Cut two lengths of 2x4 lumber to the desired width of your rack (typically between 4-6 feet).

These will serve as the horizontal supports for your rack.

3. Drill holes through each end of the 2x4s, spaced about 12 inches apart. These holes will be used to attach the supports to either side of your chosen mounting location (e.g., using lag bolts into studs in a garage).

4. Affix one support horizontally at each chosen location, making sure that they are level with each other before tightening all hardware fully.

5. For added stability, you may wish to add diagonal braces between each support and the corresponding corner of your chosen mounting location (again, using lag bolt sand washers). Just be sure not to overtighten these so that they strip out the wood!

6. Cut several lengths of 1x2 lumber (or PVC pipe) to act as vertical supports for your kayaks' hulls. The number and spacing of these will depend on both the size/width of your kayaks and how many you wish to store on this particular rack.

For example, if you have two narrow kayaks, you may only need four vertical supports placed evenly across the width of your horizontal supports; however, if you have wider kayaks or more kayaks, you'll probably want more vertical supports.

In general, it's best to provide at least two points off contact for each kayak stored on the rack.

How Do You Build a 2X4 Kayak Rack?

If you're an avid kayaker, you know the importance of having a good kayak rack. Not only does it make transporting your kayaks easier, but it also keeps them safe and secure while you're on the road. Here's how to build a simple and effective 2x4 kayak rack for your car or truck.

First, cut two pieces of 2x4 lumber to the desired length. These will be the uprights for your rack. Next, Cut four more pieces of 2x4 lumber to 18 inches in length.

These will be used as cross supports for your rack. Now it's time to assemble the frame of your rack. Take one of the uprights and attach two of the cross supports to it using screws or nails.

Repeat this process with the other upright. Now you should have a rectangular frame with two uprights and four cross supports. To make sure your rack is stable, add some diagonal bracing by attaching one piece of 2x4 lumber from the top left corner to the bottom right corner, and another piece from the top right corner to the bottom left corner.

Finally, drill some holes in each upright so that you can strap down your kayaks later on. And that's it!

Do It Yourself Kayak Roof Rack?

If you're an avid kayaker, chances are you've considered a DIY roof rack at some point. While commercially available kayak roof racks can be expensive, it is possible to build your own for a fraction of the cost. With a few simple tools and materials, you can easily construct a sturdy and reliable roof rack that will get your kayak to and from the put-in with ease.

In its simplest form, a kayak roof rack consists of two parts: something to attach the rack to your vehicle, and something to support the kayak on the rack. For the former, you'll need either crossbars or a bare roof (depending on what kind of vehicle you have). If using crossbars, make sure they are properly secured to your vehicle before proceeding.

For the latter, padding is key to protecting your kayak from scratches and abrasions. You can use foam pipe insulation or pool noodles cut lengthwise for this purpose. Once you have your materials gathered, follow these steps to install your DIY kayak roof rack:

1) Place the foam padding along the length of the crossbars (or bare roof), making sure there is enough padding to fully support the Kayak(s).

2) Carefully place one end of the Kayak onto the padding/roof Rack, then gently lift/slide it until it's resting in the desired location. It's helpful to have another person assist with this step.

3) Repeat step 2 for each additional Kayak.

4) Use straps or rope to secure The Kayaks In place, looping them around the hull and tying them off To Something solid like A hitch receiver or bumper.

5) Test everything Before heading out On The road to make sure That the Kayaks Are secure and won't slide around Or fall off.

With these basic instructions, you should now be able to install your very own DIY kayak roof rack! Just be sure to take all necessary safety precautions while doing so, and never leave your kayaks unattended on top of a vehicle. Happy paddling!

How Do You Build a PVC Kayak Storage Rack?

PVC kayak storage racks are a great way to keep your kayaks off the ground and out of the way when they're not in use. Here's how to build your own PVC kayak storage rack:

1. Cut your PVC pipe into 4 equal lengths using a hacksaw or PVC cutter.

2. Connect the pieces of PVC pipe together at the corners using elbow joints or T-joints. Make sure the connections are secure and won't come apart easily.

3. Place your completed rack in an area where it won't be in the way, but will be easy to access when you want to use your kayaks.

4. Hang your kayaks on the rack by their handles or straps, making sure they're secure so they won't fall off.


Kayaks are a great way to enjoy the outdoors, but they can be difficult to transport and store. A kayak rack is a great solution to this problem, and there are many different DIY kayak rack plans available online. These DIY kayak rack ideas & plans are some of the best that we’ve found.

There are racks that can be mounted on the roof of your vehicle, on the side of a trailer, or even in your garage. There are also standalone racks that can be used to store multiple kayaks. No matter what your needs are, there’s sure to be a DIY kayak rack plan that will work for you.

Kayaks Report is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to

Amazon and the Amazon logo are trademarks of, Inc. or its affiliates.

Copyright 2024 Kayaks Report -All Rights Reserved.